Carzilla is a Rolls Royce body kit specialist in Dubai for the Cullinan, Ghost, Wraith, Dawn, Phantom and Spectre. Our workshop test-fits, paints, fits and calibrates carbon fiber body kits, widebody kits, facelift conversions and Black Badge styling kits in-house, so the car leaves with factory-level panel gaps, a matched paint finish and every sensor working.
Get a Rolls Royce Body Kit Quote Call 056 684 9665A Rolls Royce body kit is not a set of plastic add-ons. The front bumper feeds air to the V12 cooling stack, carries the parking sensors and front radar, and sits around an illuminated grille on newer models. The side skirts have to clear rear-hinged coach doors, and the whole car rides on air suspension that changes height on its own. Fitting a kit properly means understanding all of that, not just bolting parts on.
That is why our Rolls Royce body kit installation is carried out by the same team that works on these cars every day at our Rolls Royce repair workshop in Dubai. Whether you are adding a carbon front lip, a full widebody kit or a Series II facelift conversion, the car is inspected, dry test-fitted, painted in our booth and calibrated before it is handed back. You can see more of our wider car body kit work in Dubai across other luxury brands.
Every Rolls Royce body kit service below is handled under one roof in Al Quoz – design advice, fitting, paint, wiring, calibration and protection. Our own Rolls Royce mechanics and body technicians do the work, and no part of the job is sent to another garage.
Dry prepreg, forged and wet-lay carbon fiber bumpers, lips, skirts, diffusers, mirror caps and bonnets fitted with correct mounting and a UV-stable clear coat. See our carbon fiber body kit service for repairs to existing carbon parts.
Fender flares and arch extensions fitted with the wheel offset, tyre coverage and suspension travel checked at full lock and full compression, so the tyres never touch the arch liners.
Older-to-newer styling conversions such as the Cullinan Series II look, including bumpers, grille, lighting and the wiring and coding that the new parts need to work.
Darkened grille, Spirit of Ecstasy, badges, window surrounds and lower trims for a Black Badge look, finished so dark chrome and gloss black parts match across the car.
Single-part upgrades for owners who want a subtle change – fitted and gapped to the factory panels, with ground clearance checked at the car's lowest access height.
Painted in our own booth and matched to your exact colour code, including Bespoke and two-tone finishes, with hand-painted coachlines restored where the kit meets them. Our car painting service uses the same process.
Kerbed lips, cracked splitters, scraped skirts and loose kit parts repaired and refinished at our auto body shop, or remade if the part is beyond saving.
Paint protection film and ceramic coating applied once the new paint has fully cured, so stone chips and sand do not damage the new parts. Book it with our car detailing and PPF team.
Each Rolls Royce model has its own body structure, sensor layout and kit options. Our Rolls Royce body kit garage plans every job around the specific model and generation in front of us.
The most requested model for body kits in Dubai. We fit widebody kits, carbon fiber aero kits and Series I to Series II facelift conversions. The Series II front adds an illuminated Pantheon grille and tall daytime running lights that run down into a new bumper, so a conversion needs lighting, wiring and coding work, not just new panels.
Rolls Royce Cullinan service & repair →Ghost owners usually choose a cleaner look: a front lip, carbon mirror caps, side skirts and a rear diffuser. First-generation and current-generation Ghosts are built on different structures, so mounting points, materials and fixings are different for each.
Rolls Royce Ghost repair →The Wraith coupé suits full aero kits with front bumper, side skirts, wider front fenders, a boot spoiler and a rear bumper with diffuser. The long rear-hinged doors leave little room under the sill, so skirt depth is set with the door open and closed.
Rolls Royce Wraith repair →On the Dawn convertible, the kit has to look right roof up and roof down. We keep the rear deck and hood mechanism clear of any new parts and check body flex points before fitting larger panels.
Rolls Royce Dawn repair →Phantom kits are usually restrained – lips, skirts, wheels and grille finishes. The Phantom is built on an aluminium spaceframe, so every fixing and drill point is planned to avoid corrosion and structural damage.
Rolls Royce Phantom repair →On the electric Spectre, front intakes feed battery and drive unit cooling instead of a V12. We keep those openings working and handle the high-voltage safety steps before any front-end work.
Rolls Royce workshop Dubai →Most fitting problems on a Rolls Royce body kit come from the car's engineering, not the kit itself. These are the points our Rolls Royce mechanics check on every installation.
The Phantom, Cullinan, current Ghost and Spectre use an aluminium spaceframe, while the first-generation Ghost, Wraith and Dawn use a largely steel body. Steel screws, steel drill swarf or the wrong rivets on aluminium cause galvanic corrosion under the paint. We use compatible fixings and isolating washers, clean every drill point and never cut or drill structural members.
The front bumper openings feed the radiators, charge-air coolers, AC condenser and brakes. A kit with blanked or smaller intakes looks fine in a showroom but causes heat soak in Dubai traffic in summer. We check that every opening lines up with the ducting behind it. If your car already runs hot, our Rolls Royce engine repair team checks the cooling system first.
Parking sensors must sit at the correct angle in the new bumper, and the front radar must sit behind a radar-transparent surface. Carbon fiber and metallic paint block radar signals, so radar covers are never made from carbon. After fitting, the sensors and driver assistance systems are calibrated with diagnostic software and tested on the road.
Newer models offer an illuminated Pantheon grille, and every model has a retracting Spirit of Ecstasy. Aftermarket grilles and grille surrounds must keep the retraction unit and its anti-theft function working, and grille lighting needs the correct wiring and coding so no warning messages appear.
Rear-hinged coach doors swing open from the rear edge, close to the side skirts. A skirt that is too deep or too far out will catch the door or a kerb. We test door swing, soft-close and power-close operation after the skirts are fitted.
Air suspension lowers the car for access and at speed, so lip clearance is checked at the lowest setting, not the normal one. If a lowering module is added, ride height is set first, then wheel alignment and camera calibration. Our Rolls Royce suspension repair team handles air springs, height sensors and calibration in the same visit.
The material decides how the kit fits, how it handles Dubai heat and how long the finish lasts. Our Rolls Royce body kit specialists will tell you honestly which material suits your car and how you use it.
| Material | How it is made | Best for | What to know in Dubai |
|---|---|---|---|
| Dry prepreg carbon fiber | Resin-impregnated carbon cured under heat and pressure in an autoclave | Full carbon fiber body kits, bonnets, visible-weave parts | Lightest and most stable shape; still needs a UV-resistant clear coat to stop yellowing |
| Forged carbon | Chopped carbon pressed in a mould, giving a marbled look | Lips, mirror caps, trim pieces, diffusers | Distinctive finish; clear coat quality decides how well it ages in sun |
| Wet-lay carbon | Carbon sheets laid by hand with resin, often over fibreglass | Lower-cost carbon-look parts | Heavier and less stable in heat; fit and clear coat must be checked carefully |
| Fibreglass (FRP) | Glass fibre and resin, usually painted | Painted bumpers and large widebody panels | Needs more fitting and filling work; can crack on impact |
| Polyurethane (PU) | Flexible moulded plastic, similar to OEM bumpers | Painted lips and skirts that may meet kerbs or ramps | Flexes instead of cracking; needs flex additive in primer and paint |
Whatever the material, every part is dry test-fitted before paint. If a part does not fit within tolerance, it is corrected or replaced before any paint is spent on it.
A clear, step-by-step process carried out by one Rolls Royce body kit mechanic team means no surprises on cost, finish or timing. You get updates on WhatsApp throughout, and a firm completion date once the dry test fit is done.
A single part such as a lip or spoiler usually takes one to two days. A full Rolls Royce body kit with paint usually takes several days to two weeks, depending on the kit and the paint work involved.
If you are buying a modified Rolls Royce rather than fitting a kit, book a pre-purchase car inspection and run a UAE VIN check first.
We record panel gaps, paint thickness readings and any stored fault codes before work starts, so the car's condition is documented.
Every part is trial-fitted unpainted to check gaps, mounting points, sensor positions and door clearance.
Mounts are prepared with the correct fixings for aluminium or steel, and sensor brackets are moved where the kit needs it.
Parts are painted in our booth and matched to your colour code with a spray-out test card before the final coat.
Parts are fitted and gapped, and lighting, grille illumination and sensors are connected and coded.
Ride height, alignment, parking sensors and driver assistance systems are checked and calibrated, then the car is road-tested and delivered.
Bolt-on parts such as bumpers, side skirts, diffusers and spoilers are generally allowed in Dubai if they are securely fitted, have no sharp edges and do not block lights or the driver's view. Widebody kits are where more care is needed – tyres must not stick out past the arches, and changes to the car's width, colour or ride height may need approval and an update to your Mulkiya.
Before we start, our Rolls Royce body kit workshop tells you exactly what applies to your build. Read our full guide to car modification rules in Dubai, or have the car checked through our RTA vehicle inspection service before renewal. You should also tell your insurer about any body kit before the work is done.
There is no single Rolls Royce body kit price, because a carbon front lip on a Ghost and a full widebody conversion on a Cullinan are completely different jobs. The cost depends mainly on the kit itself, how much paint and blending is needed, and how much wiring and calibration the new parts require.
Send us your car's model, year and photos of the look you want on WhatsApp. Our Rolls Royce body kit specialist will reply with a clear, itemised quote covering parts, paint, fitting and calibration – free of charge, and with no hidden extras.
Carzilla is a body shop and Rolls Royce service center first, and a kit fitter second. The technicians who fit your Rolls Royce body kit already know where the sensors, harnesses and mounting points sit on your model, and they can fix anything found during the job in the same visit.
Every job comes with a written quote before work starts, and your car stays with our own team in Al Quoz from start to finish. For routine care on the same visit, our Rolls Royce service team can carry out scheduled maintenance while the car is with us. Learn more about Carzilla.
A body kit often goes together with other work. These related services are carried out by the same Rolls Royce garage, so the whole car is finished to one standard.
Owners planning long-term care can also read what Rolls Royce owners in Dubai must know about long-term maintenance, and why early suspension inspection matters before any lowering work.
Looking for a Rolls Royce body kit garage near you? Our workshop is in Al Quoz Industrial Area 2, and we offer Free Pickup and Delivery* across Dubai, so your Rolls Royce is collected and returned without you visiting the garage.
Our Rolls Royce body kit workshop fits kits to the Cullinan, Ghost, Wraith, Dawn, Phantom and Spectre, including Black Badge versions. WhatsApp us your model and year and we will confirm the options for your car.
Yes. A Cullinan Series II facelift conversion covers the bumper, grille and lighting. Because the Series II uses an illuminated Pantheon grille and longer daytime running lights, the conversion includes the wiring and coding needed for everything to work without warning messages.
It can if it is fitted incorrectly. We set sensor angles in the new bumper, keep radar covers radar-transparent and calibrate the sensors and driver assistance systems after fitting.
Yes. Every part is painted in our own booth and matched to your colour code, including Bespoke and two-tone finishes. Exposed carbon parts get a UV-resistant clear coat instead.
Bolt-on kits are removable. Some widebody kits need permanent changes such as arch trimming. We explain exactly what is involved for your car before any work starts.
A single part usually takes one to two days. A full kit with paint usually takes several days to two weeks. You get a firm completion date after the dry test fit.
Changes that affect the car's registered dimensions, colour or ride height may need approval and a Mulkiya update. Bolt-on parts that are securely fitted are generally fine. We confirm what applies to your build before you commit.
Yes. Cracked splitters, kerbed lips and scraped skirts are repaired and refinished, or remade if they are beyond repair.
Send us your Rolls Royce model and the look you want. Our body kit specialists will reply with advice and an itemised quote, with Free Pickup and Delivery* anywhere in Dubai.
WhatsApp Us Your Car Contact Our Garage*Free Pickup and Delivery within Dubai. Terms apply.
Our team of experts specialize in all Minor, Full and Major issues, inspection, lubrication & replacing Auto Mobile parts.
© 2026 Carzilla Auto Service. All Rights Reserved